Mitsubishi heavy industries

Packaged Split Systems

Mitsubishi Heavy Industries PAC range is ideal for air conditioning offices, shops, restaurants and bars as well as other commercial applications. With capacities ranging from 4kW to 25kW’s, the PAC single splits are available with the following indoor units:

– Ceiling Cassette Systems
– Ducted Systems
– Ceiling Suspended Systems
– Floor Standing Systems

Ceiling cassette systems

  • Standard Cassette

    The FDT cassette range features a new thinner design allowing these systems to be installed into the smallest of ceiling voids. All models have a built in condensate pump with a maximum lift of 850mm.

    The FDT range is available in sizes starting from 4kW up to 14kW. All models have individual flap control on each of the 4 outlet louvers which can be programmed via the remote controller.

    MHI’s unique draft prevention panel is also available as an option for applications for where the occupant does not wish to have cold or hot drafts of air on them.

    Motion Sensors are also available as an option with this model providing advanced energy saving features and allowing the cassette to respond to the changing cooling and heating requirements of a room.

    Key Features:

    • Latest R32 Refrigerant
    • Available with a range of outdoor units, offering high SEER’s & SCOP’s
    • Individual Louvre Control
    • Available with standard or draft prevention panel
    • Motion sensor available to improve comfort and energy performance
    • Extended pipe runs of up to 100m
    • Indoor units with branch duct and fresh air knockout
    • Available with hard wired or infrared controls
    • Available in a compact version for mounting in a single ceiling tile
    Technical Info
  • Compact Cassette

    The FDTC cassette is perfect for small offices and has a 620mm x 620mm compact design which fits into a standard ceiling grid. These systems feature an integrated drain pump capable of an 850mm lift.

    MHI’s unique draft prevention panel is also available as an option for applications for where the occupant does not wish to have cold or hot drafts of air on them.

    Motion Sensors are also available as an option with this model providing advanced energy saving features and allowing the cassette to respond to the changing cooling and heating requirements of a room

    Technical Info
  • One Way Cassettes

    MHI’s one-way cassette series units are available in two models the FDTQ and FDTS.

    The FDTQ available in sizes 2.2kW to 3.6kW features a compact design which fits into a 600 x 600 ceiling grid. At only 220mm height it can fit into shallow ceiling grids.

    The FDTS is available in larger sizes of 4.5kW and 7.1kW and has individual flap control via its two louvres. Enabling greater control over airflows and improved comfort for building occupants.

    Technical Info

Under ceiling systems

  • Under Ceiling Systems

    The FDE-VH ceiling suspended systems are designed for scenarios where there is no false ceiling or void to fit a standard cassette. Available in sizes from 4kW to 14kW. These units provide installation flexibility, with refrigerant pipework being able to be fitted with top, right or rear piping options available.

    Motion Sensors are also available as an option with this model providing advanced energy saving features and allowing the cassette to respond to the changing cooling and heating requirements of a room.

    Key Features:

    • Latest R32 Refrigerant
    • Available with a range of outdoor units, offering high SEER’s & SCOP’s
    • Extended pipe runs of up to 100m
    • Top, right or rear piping available, for added installation flexibility
    • Available with hard wired or infrared controls
    • Slim height design of 210mm or 250mm
    Technical Info

Ducted Systems

  • High static ducted

    The FDU high static ducted range is available from 4.5kW to 28kW. These units are perfect for an office application. Featuring a built-in 600mm drain pump allowing for flexible routing of condensate pipework. A compact 280mm high design for the 7.1kW-16kW allow these systems to be fitted into shallow ceiling voids and just 379mm height for the 20kW+ units.

    With up to 200Pa static pressure available, these units can work with extended ductwork runs.

    Motion Sensors are also available as an option with this model providing advanced energy-saving features and allowing the unit to respond to the changing cooling and heating requirements of a room.

    Key Features:

    • Latest R32 Refrigerant
    • Available with a range of outdoor units, offering high SEER’s & SCOP’s
    • Indoor units only 280mm high
    • External static pressure control function
    • Extended pipe runs of up to 100m
    • Drain lift pumps fitted as standard
    • Available with hard wired or infrared controls
    Technical Info
  • Low static ducted

    The FDUM-VH ducted range is available from 4kW to 14kW. Utilising the latest R32 refrigerant these units are perfect for an office application. Featuring a built in 600mm drain pump allowing for flexible routing of condensate pipework. With a compact 280mm high design allow these systems to be fitted into shallow ceiling voids.

    Motion Sensors are also available as an option with this model providing advanced energy saving features and allowing the cassette to respond to the changing cooling and heating requirements of a room.

    Key Features:

    • Latest R32 Refrigerant
    • Available with a range of outdoor units, offering high SEER’s & SCOP’s
    • Indoor units only 280mm high
    • External static pressure control function
    • Extended pipe runs of up to 100m
    • Drain lift pumps fitted as standard
    • Available with hard wired or infrared controls
    Technical Info

Floor Standing Indoors

  • Floor Standing

    Often utilised in conservatories where there is limited wall space at a high level, the SRFZS-W floor standing unit offers A++ rated performance in cooling mode across the range. Its unique twin air outlets provide optimum balance of air outlet direction and improved air flow volumes.

    These systems feature a host of advanced functions with intelligent logic to make sure that, in both heating and cooling mode, the best possible comfort and performance levels are achieved.

    These units are specifically designed for the domestic market and have built in allergen filters to reduce dust and pollen build up in the home.

    Technical Info
MARKETING LEADING TECHNOLOGY

DISCOVER THE MHI RANGE

MITSUBISHI HEAVY INDUSTRIES

RAC Split Systems

MITSUBISHI HEAVY INDUSTRIES

VRF Systems

MITSUBISHI HEAVY INDUSTRIES

Multi Split Systems